MDF
Due to their homogeneous structure, MDF (medium-density fiberboard) panels are easy to work with and versatile in application. They are paintable and can be covered with various surfaces. For example, they are very often used by carpenters and joiners, especially for interior finishing.
Features
MDF panels from Broszeit are available both as a standard version and in flame-retardant, moisture-resistant and low-formaldehyde or formaldehyde-free variants.
Areas of application
Interior design / interior finishing, furniture production, substrate for HPL or veneer
-
suitable for interior finishing and furniture making
Melamine coated Compact Density Fibreboard (density >1,000 kg/m³), with black colored core, low swelling & high physical and mechanical properties. -
High-quality MDF board without added formaldehyde resin for use under dry conditions in all categories of load duration
MDF board with a hard, finely sanded surface that is colored black in the mass. MDF Fibrabel Black LF + has low formaldehyde emissions (E1 class) and meets the requirements of the ChemVerbotsV for Germany. MDF Fibrabel Black LF + also meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2, according to ACTM. This MDF board also meets the requirements of the US EPA according to TSCA Title VI. -
MDF board with black coloured core and 'satin' coating on both sides, for a subtle satin effect
High-density MDF board with a transparent lacquer finish on both sides, coloured black in the mass. . Nevertheless the small wood fibres remain visible on the panel’s surface, emphasizing the natural origin of the product. The finish consists of an inert, UV-cured varnish that does not have any contains harmful substances. Each panel has a self-adhesive protective film on both sides. The panels have a core that can be screwed together particularly well. High humidity will cause minimal stretching and swelling of the board. This board has low formaldehyde emission (E1 class, ChemVerbotsV compliant) Zudem erfüllt Fibralux MR Black Satin die the requirements of the California Air Resource Board (Emissions Control Agency of California). According to ASTM E 1333-96, the formaldehyde emission is lower as 0.11 ppm, which corresponds to CARB, Phase 2 of the ACTM. This MDF board also meets the requirements set by the California Air Resources Board (CARB - phase 2) and EPA (TSCA - Title VI).
mdf-transparenter-lacquer
mdf-coloured
mdf-feuchtigkeitsbeständig
mdf-high-density
-
MDF board with a black colored core and a super matt coating on both sides, which creates a decorative and uniquely soft feel with an anti-fingerprint effect
Highly compressed MDF board, black down to the core, with a transparent, super matt Coating on both sides. The coating is characterized by an anti-fingerprint effect and a pleasant feel. Nevertheless, the fine wood fibers remain visible on the surface of the panel, which emphasizes the natural origin of the product. Such a coating consists of a lacquer which is UV-cured under inert conditions and which does not contain any harmful substances. Each plate has a self-adhesive protective film on both sides.mdf-transparenter-supermatter-lack
mdf-coloured
mdf-feuchtigkeitsbeständig
mdf-load-bearing
mdf-high-density
-
MDF board with a grey colored core and a super matt coating on both sides, which creates a decorative and uniquely soft feel with an anti ‑ fingerprint effect
Highly compressed MDF board that is grey to the core with a transparent, super matt Coating on both sides. The coating is characterized by an anti-fingerprint effect and a pleasant feel. Nevertheless, the fine wood fibers remain visible on the surface of the panel, which emphasizes the natural origin of the product. Such a coating consists of a lacquer which is UV-cured under inert conditions and which does not contain any harmful substances. Each plate has a self-adhesive protective film on both sides. With high humidity there is minimal stretching and swelling of the panel. At the same time, it has a particularly easy screwable core. Fibralux MR Grey Super Matt offers low formaldehyde emissions (class E1, ChemVerbotsV compliant). In addition, Fibralux MR Grey Super Matt meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2, according to ACTM. This MDF board also meets the requirements of the US EPA according to TSCA Title VI.mdf-transparenter-lacquer
mdf-grey
mdf-feuchtigkeitsbeständig
mdf-high-density
-
MDF board with a grey colored core and a super matt coating on both sides, which creates a decorative and uniquely soft feel with an anti ‑ fingerprint effect
Highly compressed MDF board that is grey to the core with a transparent, super matt Coating on both sides. The coating is characterized by an anti-fingerprint effect and a pleasant feel. Nevertheless, the fine wood fibers remain visible on the surface of the panel, which emphasizes the natural origin of the product. Such a coating consists of a lacquer which is UV-cured under inert conditions and which does not contain any harmful substances. Each plate has a self-adhesive protective film on both sides. With high humidity there is minimal stretching and swelling of the panel. At the same time, it has a particularly easy screwable core. Fibralux MR Grey Super Matt offers low formaldehyde emissions (class E1, ChemVerbotsV compliant). In addition, Fibralux MR Grey Super Matt meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2, according to ACTM. This MDF board also meets the requirements of the US EPA according to TSCA Title VI.mdf-transparenter-supermatter-lack
mdf-grey
mdf-feuchtigkeitsbeständig
mdf-high-density
-
High quality MDF board for non-load-bearing applications in dry conditions.
MDF board with a hard, fine sanded surface. MDF Fibrabel LF+ has a low formaldehyde emission (E1 class) and meets the requirements of the ChemVerbotsV for Germany. In addition, MDF Fibrabel LF+ meets the requirements of the California Air Resource Board (California Emission Control Board). According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which is CARB, phase 2, according to ACTM. This MDF panel also meets the US Environmental Protection Agency (EPA) TSCA Title VI specifications. -
Moisture-resistant, fire retardant and non-structural MDF board with no added formaldehyde for industrial processing and interior applications The MDF board is manufactured without added formaldehyde resin.
A high density MDF board with a hard, fine and smoothly sanded surface. characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins) The Air Resource Board (ARB) has confirmed (n N-18-177) that Fibralux MR FR NAF is an MDF panel without added formaldehyde resin (Section 93120.3 of the ATCM "Airborne Toxic Control Measure”). This means that the formaldehyde emission is below 0.04 ppm (90% of the tested material) with a maximum of 0.06 ppm for each individual measurement. Furthermore, it is exempt from testing and certification for compliance with the Toxic Substances Control Act (TSCA). Fibralux MR FR NAF is hardly flammable (ASTM E84 Class A/ Class 1 rating for thicknesses 9 - 30 mm and European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For all available thicknesses (from 6 to 30 mm), Fibralux MR FR NAF is B-s1-d0 certified (EN 13501-1).mdf-naf
mdf-fire-retardant
mdf-feuchtigkeitsbeständig
mdf-high-density
-
Moisture-resistant MDF board for use in a damp environment, also suitable for construction purposes.
With high humidity there is minimal stretching and swelling of the panel. The Air Resource Board (ARB) has confirmed (n ° N ‑ 18‑177) that Fibralux MR NAF is an MDF board without added formaldehyde resin (Section 93120.3 of the ATCM "Airborne Toxic Control Measure"). This means that the formaldehyde emission is below 0.04 ppm (90% of the tested material) with a maximum of 0.06 ppm for each individual measurement. It is also exempt from testing and certification for compliance with the Toxic Substances Control Act (TSCA).mdf-naf
mdf-feuchtigkeitsbeständig
mdf-load-bearing
mdf-high-density
-
High-quality MDF board for industrial processing under dry conditions
Fibromax Pro FI (Fiber Improved) LF + is a highly compressed MDF board with an increased proportion of softwood compared to Fibromax Pro, which results in a lighter board color . Fibromax Pro FI LF + has an excellent stock removal rate and a well-sealed surface. Fibromax Pro FI LF + meets the requirements of the ChemVerbotsV for Germany. These panels can be used in service class 1 (restrictions on temperature and humidity) and in biological hazard class 1 of EN 335-3. Fibromax Pro LF erfüllt die Anforderungen des California Air Resource Board (Emissionsschutzbehörde Kaliforniens) (für Dicken im Bereich > 8 und <= 28 mm). According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2, according to ACTM. This MDF board also meets the requirements of the US EPA (for thicknesses in the range> 8 and <= 28 mm) according to TSCA Title VI. -
High quality MDF board for use in dry conditions and especially for interior design and furniture production. Industrially coated on both sides with a white and even UV primer.
MDF board with primed surface. Fibrabel Prime has low formaldehyde emissions (E1 class). Fibrabel Prime also meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2 of the ACTM. This MDF board also meets the requirements of the EPA according to TSCA Title VI. -
Ready-to-paint, lightweight MDF board with a primer coat
Fibrofit Prime is an MDF board with a thoroughly compacted surface, coated on both sides with a uniform white primer coating. This environmentally friendly primer coating has a high dry matter content and is applied using rollers. A hardening process with UV light makes this primer particularly high-quality. This panel can be painted directly in the desired final color. The panels can be used in service class 1 (dry environment) and exclusively within hazard class 1 of the EN 335-3 standard.
Agency partner UNilin
Pioneer of the circular economy
UNILIN has been a pioneer of the circular economy since the 160s. The Union des Lins at the time used shives — a residual product from the flax industry — as the basic base material for panels. To keep up with the growth over the years, UNILIN kept on searching for new, sustainable raw materials. Soon, residual material from the wood industry became the new basic base material.
INTELLIGENT COOPERATION
We only process wood from sites within a 400 km radius of the production facilities. This local wood extraction is possible thanks to intelligent cooperations with suppliers, including container parks, demolition companies, the packaging industry and even the company’s own customers. What they consider waste, we use as raw materials. They can get rid of their residues, which we use in our production process.
SUSTAINABLE TRANSPORT
Most of the recycled wood comes from Flanders. Thanks to this local access, we not only limit our transport, but also the environmental impact associated with it. To limit the traffic chaos on the Flemish roads, we import wood from abroad via inland waterways whenever possible. Our factory in Oostrozebeke has its own loading quay for this. Did you know that one cargo ship takes up to 60 trucks off the road?
