Chip
They are the universal wood-based material par excellence and are therefore suitable for a whole range of industries and areas of application: Chipboard is used, among other things, as exterior cladding, wall elements, prefabricated screed, roof cladding / concrete cladding or ceiling, but also in the form of transport boxes or planking.
Eigenschaften
Veneered and, depending on requirements, particularly light, flame-retardant or moisture-resistant.
Application area
Furniture industry, construction and interior design
-
Melamine faced, non-structural chipboard for interior and furniture, suitable for heavy-duty surfaces thanks to the product’s multi-layer structure
This product satisfies the surface specifications of a base board, bonded on two sides with a HPL. The melamine faced, high-performance board can be used in dry conditions, service class 1 and is made from 100% recovered wood. -
Moisture-resistant, structural board with lacquer-coating and sealed edges for re-useable concrete formwork
Betonforce Black is an MUF-glued, high-density chipboard. The boards have a smooth, dark and shiny concrete formwork UV lacquer on both sides. This waterproof and leach-resistant acrylic lacquer is in three layers: one layer of pore filler and two finishing layers. To keep moisture absorption to a minimum, the edges of the boards are sealed. Betonforce Black has an excellent screwable core and only demonstrates minimal expansion and swelling at high atmospheric humidity. Betonforce Black can also be finished in another colour combination on demand and subject to minimum order requirements.
chipboard-p5
moisture-resistant
chipboard-load-bearing application
chipboard-reusable
-
Moisture-resistant, structural board with smooth protection finish, for re-usable concrete formwork
Betonspan Plus is an MUF-glued, high-density chipboard. The boards have a vapour-proof protection finish on both sides. Betonspan Plus only undergoes minimal expansion and swelling under the influence of high atmospheric humidity. -
Melamine faced fire-retardant and non-structural chipboard for interior and furniture available in an extensive range of UNILIN Evola designs
Melamine faced fire-retardant and non-structural P2 chipboard. UNILIN Evola-Antivlam is suitable for dry conditions, service class 1, mainly used for interior and furniture. This fire-retardant product is B-s1,d0 certified. UNILIN Evola-Antivlam is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. -
Melamine faced moisture-resistant and non-structural chipboard for interior- and furniture available in an extensive range of UNILIN Evola designs
UNILIN Evola-Hydrolis is a melamine faced moisture-resistant and non-structural P3 chipboard. UNILIN Evola-Hydrolis is suitable for humid conditions, service class 2, mainly used for interior and furniture. UNILIN Evola-Hydrolis is made from 100% recovered wood. -
Load-bearing P5 chipboard with a highly fire-retardant, wear-resistant surface and a strongly fire-retardant underside
Highly structured U7 chipboard (P6) with a highly fire-retardant (Bfl-s1), non-slip (R10) and wear-resistant (AC4) surface and a strong fire-retardant (B-s1, d0) underside with tongue and groove system. Flameshield U7 Supreme Deluxe TG is suitable for dry conditions in service class 1 and is mainly used for mezzanine floors. -
Heavy-duty U7 chipboard with a non-slip and wear-resistant surface
Highly structured U7 chipboard (P6) with a highly slip (R12) and wear-resistant (AC4) surface and a tongue and groove system on four sides. Mezzanine U7 Antislip TG is suitable for use in dry conditions in service class 1, mainly for mezzanines. The fire reaction of this product is Cfl-s1 certified. Mezzanine U7 Antislip TG consists of 100% recycled wood: up to 85% recycled wood, supplemented by wood from residual flows from the wood industry, sustainable forestry or grass verge management.
chipboard tongue and groove
mezzanine-u7
mezzanine-antislip-r12
-
Highly structural U7 chipboard with a highly fire-retardant and wear-resistant surface
Highly structural U7 (P6) chipboard with a highly fire-retardant (Bfl-s1), slipresistant (R10) and wear resistant (AC4) surface and on the edges finished with tongue-and-groove. Mezzanine U7 Supreme Deluxe TG is suitable for use in dry conditions, service class 1, mainly for mezzanine flooring. The fire reaction of the standard product is Bfl-s1 certified. Mezzanine U7 Supreme Deluxe TG is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. -
Highly structural U7 chipboard with white finish on the ceiling side for industrial floors
High-structure U7 chipboard (P6) with white finish on the ceiling side and tongue and groove system on four sides. Mezzanine U7 White TG is suitable for use in dry conditions in service class 1, mainly for storage platforms. The fire reaction of the standard product is Cfl-s1 certified. Mezzanine U7 White TG consists of 100 % recycled wood: up to 85 % recycled wood, supplemented by wood from residual streams from the wood industry, sustainable forestry or green strip management. -
Edged furniture panel with ABS edge
Edged melamine faced non-structural chipboard for interior- and furniture, available in a wide range of UNILIN Evola designschipboard-recycled-wood
Edging tape
chipboard-melamine coated
chipboard-p2
-
Fire-retardant chipboard for use in dry environments
Fire-retardant and non-structural P2 chipboard. Antivlam is suitable for dry conditions, service class 1, mainly used for interior and furniture. This fire-retardant product is B-s1,d0 certified. Antivlam consists of 89% renewable materials and is made from 100% recovered wood, of which 95% is recycled wood. This product can be PEFC and FSC certified on request, depending on the certification of our stocks.dustry, sustainable forestry or verge management. -
Low-formaldehyde, moisture-resistant and load-bearing chipboard for construction
Surface: raw, sanded Formate: 2500 x 1250 mm, 3050 x 1250 mm Stärken: 19 und 25 mm Low formaldehyde moisture resistant and structural P5 chipboard, finished on the edges with tongue-and-groove. Durelis LF+ TG is suitable for use in humid conditions, service class 2, mainly structural flooring or racking board in walls. This board has low formaldehyde emission (E1 class) and also meets the requirements to comply with the ChemVerbotsV for the Germany market. Durelis LF+ TG is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.chipboard tongue and groove
chipboard-topfinish
moisture-resistant
chipboard-p5
We manufacture to measure.
When it comes to machining, we are also experienced experts who are very familiar with all the relevant processes. Cutting to size, CNC drilling and milling, coating, varnishing, pre-assembly, edge processing, oiling, attaching space protection strips… Broszeit supplies you with everything exactly in the desired form — from composite elements and fine veneered wood materials to the finished furniture part.
