Plywood
Since 2019, Broszeit Group has also included a plywood and coating plant with its own processing and assembly centre in Neugersdorf, Saxony. This means that we can now offer our customers plywood in birch, beech or poplar “Made in Germany” — with HPL as well as CPL surface coating on request. In addition, we also supply special plywood with various middle layers such as aluminium core, cork, cork-rubber mixture or heavy-duty foil on request.
Features
Depending on the type of wood or design used, Broszeit plywood is extremely light, highly stable, bendable, flame retardant and resistant to moisture and high temperature fluctuations.
Application area
Furniture construction, counter construction, object construction, shop fitting, shipbuilding, vehicle construction, facades, load-bearing and stressed constructions
-
-
-
-
stable board for use in shopfitting and decoration
predominantly dense middle layers
Face veneers drawn
Gluing MR E1 moisture-proof
Quality B / BB
Bulk density approx. 350-380 kg / m3
both formats can be laminated paper + CPL -
suitable for interior work
preponderant density Middle layers
Gluing: WBP Phenolic Class 3 according to DIN EN 636-3
Quality: B/BB according to SFS2413 Finnish manual
Bulk density: approx. 780 kg/m3
Dimensional tolerances according toEN 315
Thickness tolerance: +/- 0,3 mm calibrated -
Suitable for interior construction
Front mostly drawn decks
Middle layer closed (cemented)
Gluing: AW100 class 3 according to DIN EN 636-3
Quality: I / II according to EN 635-2
Edges and surface oiled on all sides with linseed oil
8 leaders 2 mm / above 4 and below 4
Thickness and dimension tolerances: according to EN 315 -
Stable panels for shell construction, interior construction and furniture construction
predominantly dense middle layers
Gluing: AW100 class 3 according to DIN EN 314-2
Gluing: AW100 class 3 according to DIN EN 636-3
Format: 2500 x 1500 mm - others on request
Quality: I / II according to EN 635-2 br> Bulk density: approx. 780 kg / m3
Dimensional tolerances: according to EN 315
Thickness tolerance: ± 0.3 mm calibrated
Thicknesses: 4 - 50 mm possible
Surface coatings: HPL covered with our brands Basics, Supermatt, Basics solid and high gloss, also with a noble veneer over 75 veneers from our partner Losan -
Stable plates for shell construction, interior construction and furniture construction
Front side mostly drawn decks middle layer closed (cemented)
Gluing: AW100 Class 3 according to DIN EN 636-3
Deck quality: I / III according to EN 635-2
Edges and surface oiled on all sides with linseed oil
8 layers 2 mm / above 4 and below 4
Thickness and dimensional tolerances: according to EN 315
Thickness: 2,5 - 120 mm
Possible surface coatings: HPL covered with our brands Basics, Supermatt, Basics solid and high gloss, also veneered with over 75 veneers from our partner Losán -
Special board with special cores
Wood species: birch, beech and poplar Combi plywood beech/poplar, birch/poplar others on request Sizes: 2500 × 1250 mm, 3050 × 1500 mm, 2500 × 1830 mm, 5500 × 1000 mm maximum possible Centre layers: aluminium core, cork, cork / rubber mixture, heavy duty foil Thicknesses: von 2,5 bis 120 mm Thickness tolerances: calibrated up to ± 0.2 mm depending on thickness Glue: PVAC D3 or class 2 according to EN314 PVAC D4 or class 3 according to EN314 D4 formaldehyde-free (sauna), PU and epoxy resin Deck: HPL 0.8 mm, CPL 0.2 mm, HDF, thin chip, others on request -
Sturdy board for use in shop fitting and decoration
Albasia board can be covered with Losán veneers in thicknesses from 4 -18 mm -
Suitable for interior construction
Coverable birch multiplex board in thicknesses of 10 - 41 mm. Possible Losán veneers ami maple. Flower, maple ami. Plain, maple euro. Birch exc- Peeled, birch MD beech steamed, oak euro. Old spruce black cemented, cherry ami., Walnut ami. -
IF 20 glued
The poplar plywood panel impresses with its great stability thanks to several layers. The soft poplar wood makes it easy to work with. As a result, it is used in the following areas: Handicraft and fretwork, decorations, DIY, automotive industry, furniture and boat building, toy manufacturing and in the packaging industry.
Neugersdorfer Holzwerke GmbH
Since 2019, the BROSZEIT GROUP has been able to offer plywood — Made in Germany — in collaboration with Neugersdorfer Holzwerke GmbH. Plywood panels can be made from birch, beech, and poplar, and can be coated with any desired substrates such as HPL and CPL surfaces.
With the associated processing and assembly center, the panels can be customized according to even the most unique customer requirements.
