MDF
Due to their homogeneous structure, MDF (medium-density fiberboard) panels are easy to work with and versatile in application. They are paintable and can be covered with various surfaces. For example, they are very often used by carpenters and joiners, especially for interior finishing.
Features
MDF panels from Broszeit are available both as a standard version and in flame-retardant, moisture-resistant and low-formaldehyde or formaldehyde-free variants.
Areas of application
Interior design / interior finishing, furniture production, substrate for HPL or veneer
-
Moisture-resistant and non-structural MDF board with an evenly white primer lacquer layer
Moisture-resistant MDF board with a primed surface. With high humidity there is minimal stretching and swelling of the panel. It is suitable for common, non-load-bearing applications under humid conditions. Fibrabel MR Prime has low formaldehyde emissions (E1 class). Fibrabel MR Prime also meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2 of the ACTM. This MDF board also meets the requirements of the EPA according to TSCA Title VI. Fibrabel MR is generally colored green in the mass. The coloring is only used to distinguish. The intensity of the green color can vary within different production batches and thicknesses. Fibrabel MR Prime can also be supplied colorless.
mdf-ready-to-paint
mdf-standard
mdf-feuchtigkeitsbeständig
-
High-quality, moisture-repellent MDF board for use in damp conditions and especially for interior design and furniture production. Industrially coated on both sides with a white and even primer.
Moisture-resistant, highly compressed MDF board with a primed surface. With high humidity there is minimal stretching and swelling of the panel. Fibralux MR Prime has low formaldehyde emissions (E1 class). Fibralux MR Prime also meets the requirements of the California Air Resource Board. According to ASTM E 1333-96, the formaldehyde emission is less than 0.11 ppm, which corresponds to CARB, phase 2 of the ACTM. This MDF board also meets the requirements of the EPA according to TSCA Title VI. Fibralux MR Prime is generally colored green in the mass. The coloring is only used to distinguish. The intensity of the green color can vary within different production batches and thicknesses. Fibralux MR Prime can also be supplied colorless.mdf-ready-to-paint
mdf-standard
mdf-feuchtigkeitsbeständig
mdf-load-bearing
-
Melamine faced, non-structural MDF board for industrial processing and interior applications, ready to paint
MDF board (L-MDF according EN 622-5) with a high-quality white paint grade film on both sides, suitable for an excellent and cost and time saving paint finish. Fibrofit Paint can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). Fibrofit Paint is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. -
Melamine faced, non-structural, high-density MDF board for industrial processing and interior applications, ready to paint
High density MDF board (MDF according EN 622-5) with a high-quality white paint grade film on both sides, suitable for an excellent and cost and time saving paint finish. Fibromax Paint can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). Fibromax Paint is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. -
Ready-to-paint MDF board with lacquer carrier film
Fibromax Pro Paint is an MDF board with an excellent millable core. The panel is provided with a high-quality paint carrier film on two sides and can therefore be painted or coated with solvent or water-based paint without pre-treatment. The panels can be used in service class 1 (dry environment) and exclusively within hazard class 1 of the EN 335-3 standard. -
Ready-to-paint, lightweight MDF board with a lacquer carrier film
Fibrofit Paint is a light MDF board with a core that is easy to mill. The plate is provided with a high-quality lacquer carrier film on two sides and can therefore be painted or varnished with solvent or water-based lacquer without pretreatment. The panels can be used in service class 1 (dry environment) and exclusively within hazard class 1 of the EN 335-3 standard.mdf-ready-to-paint
mdf-standard
mdf-feuchtigkeitsbeständig
-
Ready-to-paint MDF board with lacquer carrier film
Fibrofit MR Paint is a moisture-resistant, lightweight MDF board with an exceptionally millable core. The board is coated on both sides with a high-quality paint carrier film, allowing it to be painted without pre-treatment using either solvent-based or water-based paint. The boards can be used in Service Class 2 (humid environments) and within Hazard Classes 1 and 2 according to EN 335-3. -
Non-load-bearing MDF board for industrial processing and interior construction
Clicwall® decorative wall cladding Melamine-coated and non-structural MDF board with Uniclic profile, which is available in a wide range of high-quality UNILIN Evola designs. Clicwall is suitable for dry conditions in service class 1 and is mainly used for partitions and prewalls. Clicwall consists of 100% recycled wood from residual flows from the wood industry, sustainable forestry or grass verge management. -
Non-load-bearing, moisture-resistant MDF board for industrial processing and interior construction
Clicwall® MR Decorative wall cladding Melamine-coated, moisture-resistant and non-structural MDF-H board with Uniclic profile, which is available in a wide range of high-quality UNILIN Evola Designs is available. Clicwall MR is suitable for humid conditions in service class 2 and is mainly used for partitions and prewalls. Clicwall MR consists of 100% recycled wood from residual flows from the wood industry, sustainable forestry or grass verge management -
Melamine faced fire-retardant and non-structural MDF board for separation walls and wall linings
Clicwall® FR decorative wall covering Melamine faced fire-retardant and non-structural MDF-LA FR board with Uniclic profile, available in an extensive range of high-quality UNILIN-Evola designs. Clicwall FR is suitable for dry conditions, service class 1, mainly used for separation walls and wall linings. This fire-retardant product is B-s2,d0 certified, B-s1,d0 available on request. Clicwall FR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. -
Flexible skirting board for finishing Clicwall
Decorative, flexible skirting board for finishing Clicwall, available in designs that match your Clicwall panel. This flexible skirting board is mainly used to beautify inner and outer corners. -
Flexible skirting board for the end of Clicwall, ready to paint
Ready-to-paint, flexible profile for the end of Clicwall, with a high-quality white foil finish in color quality, suitable for an excellent finish that saves time and money. This flexible skirting board is mainly used to beautify inner and outer corners. Dimensions / thicknesses: 2750 × 44 mm × 3 mm
Agency partner UNilin
Pioneer of the circular economy
UNILIN has been a pioneer of the circular economy since the 160s. The Union des Lins at the time used shives — a residual product from the flax industry — as the basic base material for panels. To keep up with the growth over the years, UNILIN kept on searching for new, sustainable raw materials. Soon, residual material from the wood industry became the new basic base material.
INTELLIGENT COOPERATION
We only process wood from sites within a 400 km radius of the production facilities. This local wood extraction is possible thanks to intelligent cooperations with suppliers, including container parks, demolition companies, the packaging industry and even the company’s own customers. What they consider waste, we use as raw materials. They can get rid of their residues, which we use in our production process.
SUSTAINABLE TRANSPORT
Most of the recycled wood comes from Flanders. Thanks to this local access, we not only limit our transport, but also the environmental impact associated with it. To limit the traffic chaos on the Flemish roads, we import wood from abroad via inland waterways whenever possible. Our factory in Oostrozebeke has its own loading quay for this. Did you know that one cargo ship takes up to 60 trucks off the road?
