Chip
They are the universal wood-based material par excellence and are therefore suitable for a whole range of industries and areas of application: Chipboard is used, among other things, as exterior cladding, wall elements, prefabricated screed, roof cladding / concrete cladding or ceiling, but also in the form of transport boxes or planking.
Eigenschaften
Veneered and, depending on requirements, particularly light, flame-retardant or moisture-resistant.
Application area
Furniture industry, construction and interior design
-
Moisture-resistant multifunctional building board sanded
Surface: raw, sanded Formats: 2500 x 1250 mm, 3050 x 1250 mm Stärken: 10 - 28 mm Low formaldehyde moisture resistant and structural P5 chipboard. Durelis LF+ is suitable for use in humid conditions, service class 2, mainly as racking board in walls or as structural flooring board. This board has low formaldehyde emission (E1 class) and also meets the requirements to comply with the ChemVerbotsV for the Germany market. Durelis LF+ is made from 100% recovered wood: up to 90% post-consumer wood, supplemented by 10% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.dustry, sustainable forestry or verge management.
chipboard-sanded
moisture-resistant
chipboard-p5
-
Low-formaldehyde moisture-resistant and structural chipboard for construction
Low formaldehyde moisture resistant and structural P5 chipboard. Durelis LF+ is suitable for use in humid conditions, service class 2, mainly as racking board in walls or as structural flooring board. This board has low formaldehyde emission (E1 class) and also meets the requirements to comply with the ChemVerbotsV for the Germany market. Durelis LF+ consists of 89% renewable materials and is made from 100% recovered wood, of which 95% is recycled wood. This product can be PEFC and FSC certified on request, depending on the certification of our stocks.dustry, sustainable forestry or verge management. -
Low formaldehyde, moisture-resistant particle board
Hydrolis LF+ is an MUF-glued, moisture-resistant chipboard with low formaldehyde content, suitable for industrial processing in furniture and interior applications. This board only displays minimal expansion and swelling under the influence of high atmospheric humidity. These boards are easy to saw and particularly suitable for applications in service class 2 (limited temperature and atmospheric humidity) and biological hazard classes 1 and 2 of EN Standard 335-3. In terms of formaldehyde emissions, they also comply with both German ChemVerbotsV legislation and the requirements set by the California Air Resource Board (CARB - Stage 2) and EPA (TSCA - Title VI).Fine sanded surface
Product class P3
Moisture-resistant
-
Low formaldehyde chipboard for high-quality interior and furniture applications.
Belspan LF+ panels have a strong, screw-in core and are very suitable for industrial processing in furniture and interior design. The chipboard P2 with reduced formaldehyde content is suitable for use in dry conditions (service category 1) and complies with both the German ChemVerbotsV legislation in terms of formaldehyde emission and the requirements set by the California Air Resource Board (CARB - phase 2) and EPA (TSCA - Title VI). Belspan LF+ is sustainable and made from >95% recycled wood. -
Tongue-and-groove board for floors and walls in dry environments
Qualirack chipboard with tongue-and-groove joints on four sides can be used for both structural and non-structural applications in dry conditions. The toothed profile ensures high stability and simple installation. This makes it possible to nail or screw the panels blind. This board is suitable for use in service class 1 (limited temperature and atmospheric humidity), and only in biological hazard class 1 of EN Standard 335-3.Product class P4
Tongue-and-groove joints
Topfinish
We manufacture to measure.
When it comes to machining, we are also experienced experts who are very familiar with all the relevant processes. Cutting to size, CNC drilling and milling, coating, varnishing, pre-assembly, edge processing, oiling, attaching space protection strips… Broszeit supplies you with everything exactly in the desired form — from composite elements and fine veneered wood materials to the finished furniture part.
