• top_group_01.jpg
  • top_group_02_losan.jpg
  • top_group_03_schweighofer.jpg
  • top_group_aunilin.jpg
  • top_group_tteam.jpg

MDF Standard

MDF V20 S-Lux - Standard


approx. 720 kg/m3 bulk density

 MDF V20 S-Lux - Standard

Area of application

High-quality MDF for use in dry conditions and in all categories of load duration.
Suitable for interior decoration and furniture production.

Description

MDF standard with high density and a hard and smoothly sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. The boards can be finished with paper, melamine, composite lay-ups or varnish and are also suitable for use under load. Standard MDFs are made of 100 % coniferous wood and do not have any coarse fibres on the surface. The boards are very easy to mill and simultaneously emit low quantities of formaldehyde (class E1).

Using the product

The boards must be used only according to use class 1 (restrictions for ambient temperature and humidity) and hazard class 1, EN 335-3. The boards must have no direct contact with water. Any stacking must be done quickly on a pallet or with a sufficient number of crossbeams. The boards must not be stored upright unless floor contact can be ruled out. Under fluctuating humidity conditions, the boards either expand or shrink. Use suitable tools for sawing, milling and drilling.

Dimensions and stock program

Thickness: 6 to 30 mm standard – other thicknesses available upon request. Max. width and length: 244–255 to 630 cm. Spanolux has high capacity saws and can provide all dimensions. The pressing capacities generally enable delivery of all thicknesses, lengths and widths.

 

Refer to the individual items for details on packaging units in pcs.
You can find the data sheet with technical details in the  Downloadcenter.

Technical data

 

Stock programme

Thickness 
in mm
Dimensions
in mm
  1220 x 2440 1220 x 3050 2070 x 2800
3 240    
4 15    
6 120 120  
8 90 90  
9 80 80  
10 72 72  
12 60 60 50
15 50 50  
16 45 45 40
18 40 40 30
19 40 40 30
22 32 32 27
25 28 28  
28 24 24  
30 24 24  

 

 

General properties + standard Unit Average values
Thickness EN 324-1   mm 9 10 12 15 16 18  19 22  25  30
Thickness EN 323  Kg/m³ 750 740 730 720 720 720 720 690 690 690
Moisture content EN 322 % 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10
Technical properties + standard   5/95 quantile values
Swelling/24u EN 317 % 17 15 15 12 12 12 12 10 10 10
Tensile strength EN 319 N/mm² 0,7 0,65 0,65 0,6 0,6 0,6 0,6 0,6 0,6 0,6
Bending strength EN 310 N/mm² 29 27 27 25 25 25 25 23 23 23
Bending elasticity modulus EN 310 N/mm² 3000 2800 2800 2500 2500 2500 2500 2300 2300 2300

 

General information

Property Standard Unit

Fibreboard specifications

Part 1: General requirements
Nominal diameter classes (mm)
19 >19
Tolerances with nominal dimensions:  
Thickness: EN 324-1 mm ± 0,2 ± 0,3
Length and width: EN 324-1 mm/m ± 2,0 mm/m, max. ± 5,0 mm
Perpendicularity: EN 324-2 mm/m 2,0 mm/m
Deviations from the straightness of length and width: EN 324-2 mm/m 1,5 mm/m
Tolerance for board thickness: EN 323 % ± 7,0
Formaldehyde perforator class E1: EN 120 mg/100g 8