• top_group_01.jpg
  • top_group_02_losan.jpg
  • top_group_03_schweighofer.jpg
  • top_group_aunilin.jpg
  • top_group_tteam.jpg

MDF Fibrabel 600 kg/m3

 

 

MDF V20 Fibrabel lightweight


approx. 600 kg/m3 bulk density

 MDF V20 S-Lux - Standard

Area of application

Lightweight medium-density fibreboards with high quality for use under non-bearing dry conditions and particularly for interior decoration and furniture production.

 

Description

MDF with low density with hard and smoothly sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. It can be finished with paper, melamine, composite lay-ups or varnish. Fibrabel® medium-density fibreboards are made of 100% coniferous wood and do not have coarse fibres on the surface. The boards are very easy to mill. 
 

Fibrabel® medium-density fibreboards meet the requirements of the California Air Resource Board (CARB - phase 2). Formaldehyde emission is below 0.11 ppm according to ASTM E 1333-96, which complies with CARB, phase 2, as stipulated by ACTM. The boards do not contain isocyanates and phenolic glues.

 

Using the product

The boards must be used only according to use class 1 (restrictions for ambient temperature and humidity) and hazard class 1, EN 335-3. The boards must have no direct contact with water. Any stacking must be done quickly on a pallet or with a sufficient number of crossbeams. The boards must not be stored upright unless floor contact can be ruled out. Under fluctuating humidity conditions, the boards either expand or shrink. Use suitable tools for sawing, milling and drilling.
 

Dimensions and stock programme

Thickness: 8 to 38 mm standard – other thicknesses available upon request. Max. width and length: 244–255 to 630 cm. Spanolux has high capacity saws and can provide all dimensions. The pressing capacities generally enable delivery of all thicknesses, lengths and widths. 

 

 

Stock programme

Thickness Dimesnsions
in mm in mm
  1220 x 2440 1220 x 2750 1220 x 3050 1250 x 2500 1310 x 3060 2070 x 2800 2200 x 3660
8 90   90        
9 80 80 80        
10 72   72       45
12 60 60 60     50 38
15 50   50        
16 45 45 45   45 40 28
18 40 40 40 50 40 30  
19 40   40     30 24
22 32 32 32     27 20
25 28   28       18
28 24   24        
30 24   24       15
38 20   20        

Refer to the individual items for details on packaging units in pcs.

You can find the data sheet with technical details in the Downloadcenter.

 

 

 

Technical data

General properties + standard  Unit Average values
Thickness EN 324-1    mm 8 9-9,6 10 11,5-12 13 14 15 16 18 19  22 25  28  30  38
Thickness EN 323  Kg/m³ 650 650 640 600 600 600 600 600 600 600 600 600 600 600 600
Moisture content EN 322 % 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10 6-10
Technical properties + standard   5/95 quantile values
Swelling/24u EN 317 % 20 16 16 16 14 14 14 14 14 14 12 12 12 12 11
Tensile strength EN 319 N/mm² 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,45 0,4
Bending strength EN 310 N/mm² 20 20 20 20 18 18 18 18 18 18 15 15 15 15 14
Bending elasticity modulus EN 310 N/mm² 1700 1700 1700 1700 1600 1600 1600 1600 1600 1600 1500 1500 1500 1500 1400

 


General information

Property Standard Unit

Fibreboard specifications

Part 1: General requirements
Nominal diameter classes (mm)
19 >19
Tolerances with nominal dimensions:  
Thickness: EN 324-1 mm ± 0,2 ± 0,3
Length and width: EN 324-1 mm/m ± 2,0 mm/m, max. ± 5,0 mm
Perpendicularity: EN 324-2 mm/m 2,0 mm/m
Deviations from the straightness of length and width: EN 324-2 mm/m 1,5 mm/m
Tolerance for board thickness: EN 323 % ± 7,0
Formaldehyde perforator class E1: EN 120 mg/100g 8